Rack and pinion steering for VW Beetle RHD – conversion kit without welding

Rack and pinion steering for VW Beetle RHD – conversion kit without welding

1.349,00 €

VW Beetle & Karmann Ghia (Type 11,15 & 14) from 8/65 RHD – Right-Hand Drive

  • No welding required
  • Horn wiring remains original, even with a steering column featuring an insulated steering shaft bearing
  • The steering column’s safety feature remains intact
  • original, correct toe-out on turns / Ackerman angle remains
  • Cable routing through the steering shaft remains intact
  • Tie rod ends (Lemförder/Meyle/Febi/FAG) included
  • Steering column supported on both sides through additional Steering shaft bearing

Scope of delivery as shown in the picture + detailed instructions + screw lock. Does your VW’s steering column have an insulated steering shaft bearing? What is meant? …

Artikelnummer: n. a. Kategorie: Schlagwörter: , , ,

Beschreibung

Right-Hand Drive  |  Rechtslenker/Linksverkehr

No welding is required during installation. The horn’s wiring does not need to be modified. The original steering geometry (toe-out on turns a.k.a. Ackerman angle) is retained. Original steering stops do not need to be removed. This allows for reversion to the original configuration. Work on steering components requires specialized knowledge and skills, as well as an understanding of steering geometry, and should be carried out by an experienced workshop or mechanic. The conversion kit fits the original RHD Ball Joint Front Beam. Aftermarket Front Beams may differ.

Zusätzliche Informationen

Gewicht 12 kg

Ähnliche Produkte